Weighing indicator IP68, rechargeable battery.

• 5-key functional waterproof keypad.
• Backlit 25mm LCD display with 6 high contrast digits with icons for showing the active functions.
• Easy to clean ABS IP68 case, resistant to harsh and corrosive environments.
• Suitable for use on the table, column, or wall.
• Fitted with fixing bracket with adjustable inclination.
• A/D 24 bit, 4 channel converter, max. 200 conv./sec. autoselect, and up to 8 signal linearisation points.
• Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d in CE-M approved versions for legal for trade use.
• Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
• Connection with up to 8 load cells with input resistance equal to 350 Ohm or up to 16 cells of 700 Ohm each.
• Digital calibration and Set-Up from keypad or from PC through DINITOOLS.
• Power supply through built-in rechargeable battery, fitted with external 12Vdc battery charger.

• MAIN FUNCTIONS:
  - Zeroing
  - Automatic tare
  - Presettable tare
  - Printing in 1, 2 or 3 copies
  - Data transmission to PC.
   
• OPERATING MODES:
  - High Resolution Weighing x 10
  - Net/Gross or lb/kg conversion
  - Accumulation
  - Formula weighing
  - +/- Checkweighing
  - Percentage weighing
  - Approved transmission of the weight to PC/PLC (with Alibi memory ALMEM option)
  - Counting
  - In/Out Truck weighing
  - Hold and Peak.

• RS232/C bidirectional port on RJ connector for quick connection (or USB as an extra option) or RS485 on screw terminal, configurable for PC, PLC, or additional remote display.
• RS232/C bidirectional port configurable for connection to printer or labeller.
• IR input for remote control.

NOTE! Peak/Hold firmware must be ordered when ordering, it can't be added afterwards.

CALIBRATION VIDEO:                                                                           

ZERO CALIBRATION ONLY: