Weighing indicator wall, panel. stainless IP68, 2 alarms. 4-20 mA/0-10V.

Article no DGT20AN.VE
Price 660 EUR
Stock status In stock
Buy

Brand:

product information

Weighing indicator wall, panel. stainless IP68, 2 alarms. 4-20 mA/0-10V.

Multifunction weight indicator for table or wallmounting, stainless steel IP68. Ideal as a microcontroller in industrial weighing systems, making an easier and safer integration of the weighing to any automation system. Fitted with 2 inputs and 2 outputs, programmable. Also 4-20mA / 0-10V /0-5V output. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

  • Stainless steel IP68
  • Highly efficient red LED display with 6 20-mm digits and 12 LEDs for showing active functions.
  • Fitted with bracket for use on table or wall mounting.
  • A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
  • Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
  • Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
  • Up to 10.000e or multirange 2 x 3000e @ 0,3 µV/e for CE-M approved legal for trade use.
  • Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
  • Up to 8 signal linearization points with DINITOOLS (3 from keypad).
  • Time/Date (option)
  • Master/Slave management.
  • From 12 Vdc to 24 Vdc power supply.


I/O SECTION

  • 1pcs 4-20mA / 0-10V /0-5V output
  • 1pcs RS232/C bidirectional port configurable for connection to PC or external units.
  • 1pcs RS232/C bidirectional port configurable for connection to printer.
  • 2pcs150 mA 48 Vac / 150 mA 60 Vdc (NO) photomosfet outputs which may be configured as direct control or upon weight stability, with programmable weight thresholds (disable and enable thresholds).
  • 2pcs inputs (optoisolator photocouplers) configurable as: 12÷24 Vdc, 5 mA min - 20 mA max.

FUNCTIONS

THROUGH KEYBOARD:
Zeroing; Semi-automatic and presettable tare; print and/or data transmission; ON/Stand-by; Weighs totalisation; Formulation; Net/Gross weight switch; Counting; Hold; Peak; kg/Lb conversion.
Quick entry of the setpoints and the tare values.

REMOTABLE FROM EXTERNAL INPUT:
Clearing; Semi-automatic tare; Print and/or data transmission; Selected function command; ON/Stand-by.

UNIVERSAL WEIGHT REPEATER:
Connectable to any scale or PC through the RS232 serial connection, with software configuration of the input data string.

THROUGH SERIAL LINE:
Reading of the net, gross, and tare weights, microvolts or ADC converter for all the channels; Clearing; Semi-automatic and presettable tare; Scale switch; Printing; Message display; Setting of APW in piece counting; Setting of set points of the outputs; Simulation of key pressure; Reading/Writing of Alibi Memory. 

Document downloads

insert_drive_file DATASHEET-DGT.pdf
insert_drive_file DGT user manual 1004.pdf
insert_drive_file Technical Manual DGT.pdf
insert_drive_file Datasheet DGT All.pdf
insert_drive_file Modbus manual DGT.pdf
insert_drive_file Dimensions Case DGT20.pdf
insert_drive_file DGT20AN.VE Analog Output.pdf

Specification

4-20mA/0-10V Yes
Battery operated No
Complete in stainless No
Larmrelä(er) Yes
Modbus Yes
Peak/Hold Yes
Profibus No
RS232 Yes
RS485 Yes
OIML approved Yes
Water proof IP68/IP69K Yes
Water protected to IP65 Yes
Accessories / Spare parts

Buy
Price:
285 EUR
Out of stock

Buy
Price:
129 EUR
In stock

Buy
Price:
149 EUR
Out of stock

Available in several variants
Show Price from:
682 EUR

Available in several variants
Show Price from:
375 EUR

Available in several variants
Show Price from:
682 EUR

Available in several variants
Show Price from:
375 EUR
Buy your scale here! You can call, fax or email your order too.
access_time Order before 11.00
and we'll send the same day
phone Call us! +46 176 20 89 20
Opening hours 9-17 weekdays CET
shopping_cart