Single point lastcell SPSZ, stainless, IP68/69K, C3 - 500kg

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 800x800 mm.

Main features

• C3 precision class
• Off center load compensated
• Made in 17-4 ph stainless steel
• Ip68 protection
• Max. capacities from 500 to 1000 kg for platforms with dimensions up to 800 x 800 mm
• Shielded connection cable
• Test certificate available upon request

Technical features

• Minimum load cell verification interval: Vmin = EMax / 7.500-12.500
• Maximum number of verification intervals: nLC = 3000
• Full Scale Output: 2mV/V +/- 10%
• Temperature effect on zero: from ±0,0112% F.S./10K to ±0,0186% F.S/10K
• Temperature effect on full scale output:
  • ±0,0117% F.S./10K (-10°C/+20°C)
  • ±0,0170% F.S./10K (+20°C/+40°C)
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -10°C/+50°C
• Creep at nominal load in 30 minutes: ± 0,01% F.S.
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 380 ± 15 Ohm
• Output Resistance: 300...500 Ohm
• Insulation Resistance (100V) >2000 MOhm
• Safe Overload: 150 % F.S.
• Ultimate Overload: 300% F.S.
• Nominal displacement: < 0.5 mm
• 6-wire shielded cable, 3m long, 5mm diameter