Single point lastcell SPBC 300kg. Aluminium. OIML C3, ATEX.

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 700x700 mm.
CAPACITIES (kg): 100, 200, 300, 500, 630.
OIML R60. C3 precision class.
Aluminium alloy. IP65 protection.

Main Features: 

• C3 PRECISION CLASS
• OFF CENTER LOAD COMPENSATED
• MADE IN ALUMINIUM ALLOY
• IP65 PROTECTION
• MAX. CAPACITIES FROM 100 TO 630kg
• FOR PLATFORMS WITH DIMENSIONS UP TO 700 X 700 mm
• SHIELDED CONNECTION CABLE
• OIML CERTIFICATE AVAILABLE UPON REQUEST
• TEST CERTIFICATE AVAILABLE UPON REQUEST

Technical features:

• Minimum load cell verification interval: Vmin = EMax / 10.000
• Maximum number of verification intervals: nLC = 3000
• Full Scale Output: 2mV/V +/- 10%
• Combined error: 0,017% of Full Scale Output (F.S.)
• Temperature effect on zero: 0,0028% /°C
• Temperature effect on full scale output: 0,0014% /°C
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -20°C/+60°C
• Creep error after 30 minutes: 0,025% F.S.
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 410 ± 10 Ohm
• Output Resistance: 350 ± 5 Ohm
• Zero Balance: +/-10% F.S.
• Insulation Resistance: >1000 MOhm
• Safe Overload: 150% F.S.
• Ultimate Overload: 200% F.S.
• Nominal displacement: < 1mm
• SPBC 6-wire shielded cable, 3m long, 5mm diameter

ATEX Version:

• The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
  ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
  ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
• The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
• IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.