Analogue Shore hardness tester. Sauter HB. Shore D.

Price: € 219,00

Showing prices excl vat

Article no:

HBD 100-0

Stock status:

5-10 days

Brand:

Sauter

Typical application: measurement of penetration (Shore)
Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 7619-1 are often not possible because of very narrow standard tolerances
Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
Shore D plastics, formica, epoxides, plexiglass etc.
Shore A0 foam, sponge etc.
Max mode: Holds the maximum value in the display
Point mode: Shows one instant value
Can be attached to the test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D)
Delivery in a plastic box
Measuring range (Max): 100 HD
Readout (d): 1,0 HD