Stainless steel bench scale 150kg/20g with column. 400x400 mm. For ATEX 1, 21, 2, 22 zones.

Article no EPQI2GD150B
Price 2 890 EUR excl. vat
Stock status Out of stock
Buy

Brand:

product information

Stainless steel bench scale 150kg/20g with column. 400x400 mm. For ATEX 1, 21, 2, 22 zones.

Fully stainless steel bench scales, for specific use in ATEX hazardous areas. Powered by a long lasting rechargeable battery which allows an easier installation directly where it's needed. These scales don't need a power supply socket in dangerous zone nor ATEX proof power supply cables. Provided with the ATEX declaration of conformity. Ex II 2GD IIC T4 T197°C X protection.

  • Approved “single point” stainless steel load cell according to OIML R60 standards with protection against dust and water splashes according to IP67 standards.
  • ATEX approved load cell with ATEX protection:
  • ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga.
  • ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
  • Structure, enclosure and loading plate made in AISI304 stainless steel.
  • Adjustable levelling feet with plastic over shoe.
  • Supplied with support column, height:
    - 500 mm in the "Q" models;
    - 700 mm in the "X" models.


Weight indicator features:

  • IP68 Weight indicator for ATEX zones with protection methods according to:
  • ATEX II 2(2)G Ex ib [ib Gb] IIC T4 Gb for gases.
  • ATEX II 2(2)D Ex tb [ib Db] IIIC T197°C IP65 Db for dust.
  • EC-Type-Examination certificate according to Annex III (94/9/EC directive). CE-M approvable (OIML R-76 / EN 45501).
  • Waterproof 17-key numerical and functional keyboard.
  • LCD display with 6 25-mm high contrast digits, clearly visible even in poor lighting conditions and with low temperatures, and with 6 LEDs for showing the active functions.
  • Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
  • Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
  • A/D 24-bit sigma-delta conversion, up to 100 conv./sec. autoselect.
  • Power supply through external battery pack with 160h operating time. An extra battery pack for continuous use (24/7) is available as option.
  • Charger included in the supply.


Scale functions:

  • Zeroing
  • Automatic tare
  • Presettable tare
  • Selectable function command
  • On/off switching.

Selectable functioning mode:

  • High Resolution Weighing x 10
  • Net/Gross or lb/kg conversion
  • Weight totalization
  • Formula weighing
  • +/- Checkweighing
  • Counting (Max. resolution of 1.500.000 divisions)

Certifications:
The price includes the ATEX declaration of conformity (DCATEX2GD) and the load cell certificate of conformity (CCATEX).

Document downloads

insert_drive_file Datasheet_EP2GD_V1.pdf

Specification

Capacity (kg) 150,00 kg
Performance Column, Power supply
Platform lenght (mm) 400,00 mm
Platform width (mm) 400,00 mm
Resolution (g) 20,00 g
Accessories / Spare parts

Price:
490 EUR
In stock

Price:
55 EUR
Out of stock
Enter your e-mail address or phone number and we will contact you
Buy your scale here! You can call, fax or email your order too.
access_time Order before 11.00
and we'll send the same day
phone Call us! +46 176 20 89 20
Opening hours 9-17 weekdays CET
shopping_cart