Single point lastcell SPM 500kg. Aluminium. OIML C3, ATEX.

Article no SPM500
Price 160 EUR excl. vat
Stock status Out of stock
Buy

Brand:

product information

Single point lastcell SPM 500kg. Aluminium. OIML C3, ATEX.

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell; maximum platform dimensions of 600x600 mm.
CAPACITIES (kg): 100, 200, 500.
OIML R60. C3 precision class.
Aluminium alloy. IP67 protection.

Main features:

  • C3 PRECISION CLASS
  • OFF CENTER LOAD COMPENSATED
  • ALUMINIUM ALLOY CONSTRUCTION
  • IP67 PROTECTION
  • MAX. CAPACITIES FROM 100 TO 500 kg
  • FOR PLATFORMS WITH DIMENSIONS UP TO 600 X 600 mm
  • SHIELDED CONNECTION CABLE
  • OIML CERTIFICATE AVAILABLE UPON REQUEST
  • TEST CERTIFICATE AVAILABLE UPON REQUEST


Technical features:

  • Minimum load cell verification interval: Vmin = EMax / 15.000
  • Maximum number of verification intervals: nLC = 3000
  • Sensitivity: 2mV/V ± 10%
  • Temperature effect on zero: 0,01% FS/10K
  • Temperature effect on Full Span: 0,001% FS/10K
  • Compensated Temperature Range: -10°C/+40°C
  • Operating Temperature Range: -10°C/+50°C
  • Creep at nominal load in 30 minutes: 0,01% F.S.
  • Maximum excitation voltage without damage: 15 Vdc
  • Input Resistance: 300..500 Ohm
  • Output Resistance: 300..500 Ohm
  • Insulation Resistance: >2000 MOhm
  • Mechanical limit load in service: 150% F.S.
  • Destructive load: 300% F.S.
  • Deflection at nominal load: <0,5mm
  • 6-wire shielded cable, 3m long, 5mm diameter


ATEX Version:

  • The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
    ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
    ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
  • The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
  • IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.
     

Document downloads

insert_drive_file Datasheet_SPM_V1.pdf

Specification

Load cell type Single point (off center)
Approved according to OIML
Capacity (kg) 500,00 kg
Capacity (tonne) 0,50
Material Aluminium
Accessories / Spare parts

Price:
330 EUR
Out of stock

Price:
690 EUR
Out of stock
Load cell cable
LIYY 4x0,34

Price:
3 EUR
In stock
Enter your e-mail address or phone number and we will contact you
Buy your scale here! You can call, fax or email your order too.
access_time Order before 11.00
and we'll send the same day
phone Call us! +46 176 20 89 20
Opening hours 9-17 weekdays CET
shopping_cart