product information

Radiolink plus 1000/0,5kg with SW-HHP handheld display

Wireless Dynamometer - Tension Load Cell - Radiolink plus

DNV GL type approved, Complies with ASME B30.26

A wireless tension load cell capable of both weighing and dynamic load monitoring, the latest Radiolink plus is constructed of high-quality aircraft grade aluminium and features an advanced internal design structure. This internal design structure not only provides the product with an unrivalled strength to weight ratio but it also allows the use of a separate internal sealed enclosure providing the load cell's electronic components with IP67/NEMA6 environmental protection even with the battery cover plate missing, making this industry leading dynamometer even more suitable for use in the harshest environments.

Decades of development into this product include many stand out features such as our unique strain gauging method that helps compensate for wire rope torque when the Radiolink is loaded.

Featuring industry leading wireless technology and range of 700m/2300ft, the versatile Radiolink plus is supplied with an update rate of 3Hz and can be easily configured to run at industry leading speeds of up to 200Hz. Data is transmitted wirelessly utilising the latest in IEEE 802.15.4 (2.4 GHz) technology providing safe, high integrity, error free transmission of both static weight and dynamic load to a wireless handheld controller. Designed for measurement of both static and dynamic loads the Radiolink plus tension load cllcan also be used in combination with Straightpoint’s range of SW-MWLC high speed wireless data logging software allowing for simultaneous control, display and real time data logging of up to 100 Straightpoint wireless load cells. The Radiolink plus may also be used with Straightpoint’s Proof Test plus software package allowing the operator to perform load tests at a safe distance and generate real time test certificates on site. The Radiolink plus utilises easily sourced AA alkaline batteries and features advanced circuitry designed to protect the unit from damage associated with incorrectly installed batteries. This advanced circuitry extends battery life and the use of easily sourced alkaline batteries eliminates issues associated with rechargeable battery pack charging, failure and replacement.

A full array of wireless accessories are also available including signal boosters, LED wireless scoreboards and base stations with analogue (4-20mA, 0-10v, 0-5v) or digital (RS232/485, Modbus RTU, and ASCII serial communications protocol) outputs.
It is easy to see why, globally, the Radiolink plus wireless tension load cell is the number one choice for weighing and dynamic load monitoring in critical lift planning and execution.

FEATURES AND BENEFITS

  • Proprietary 2.4 GHz Wireless
  • Industry Leading Wireless Range
  • Error Free Data Transmission
  • Unrivalled Resolution
  • Environmentally Sealed
  • Audible Overload Alarm
  • Unmatched Battery Life
  • Internal Antennae
  • Compact Size
  • Remote On-Off
  • Lightweight
  • Peak Hold
  • Advanced Options Available
  • Tare
  • Design validated by F.E.A.

APPLICATIONS

  • Water weight Testing
  • Overhead Weighing
  • Loadcell Rental
  • Bollard PullingTug Testing
  • Stevedoring 
  • Heavy Lift
  • Load sense on jib winches
  • Ship to ship transfers (STS)


SUPPLIED WITH THE FOLLOWING AS STANDARD

  • Remote Hand Control
  • 4 x AA Batteries
  • Proof test certificate
  • Operator Manual
  • Carry/Storage Case
  • RFID Tagged

Radiolink plus additional technical data

Material of construction: Aluminium 2014-T6, load bearing bushes EN24T
Finish: Black anodized to BS EN 12373-1:2001 Class 10. Bushes clear passivated.
MTBF to WLL: Typically 50 million cycles
Elongation: Typically <0.4mm / at WLL

radiolink plus water weight bag
straightpoint tension load cell debogging applicationradiolink plus load monitoring heavy lift

Document downloads

insert_drive_file Radiolink plus.pdf
insert_drive_file RLP-User Manual.pdf
insert_drive_file SW-HHP-User Manual.pdf
insert_drive_file RLP Drawing.pdf
Accessories / Spare parts

Buy
Price:
594 EUR
Out of stock

Buy
Price:
3 500 EUR
Out of stock
Shackle
RLP-1t-2t-shackle

Available in several variants
Show Price from:
15 EUR

Buy
Price:
1 075 EUR
Out of stock

Buy
Price:
1 075 EUR
Out of stock

Buy
Price:
1 164 EUR
Out of stock

Buy
Price:
1 075 EUR
Out of stock

Buy
Price:
1 075 EUR
Out of stock

Buy
Price:
1 644 EUR
Out of stock
Enter your e-mail address or phone number and we will contact you
Buy your scale here! You can call, fax or email your order too.
access_time Order before 11.00
and we'll send the same day
phone Call us! +46 176 20 89 20
Opening hours 9-17 weekdays CET
shopping_cart