Transmitter vertical DIN mount. RS232/485, 2 alarms etc

Article no DGT1S
Price 240 EUR
Stock status In stock


product information

Transmitter vertical DIN mount. RS232/485, 2 alarms etc

Compact, multifunction weight transmitter / indicator, for panel mounting on DIN bar.
It allows the direct reading and diagnostics of the connected weighing system. The wide range of available interfaces, makes it easy to integrate the weighing with any automation system. 
CE-M approved (OIML R-76 / EN 45501).
MID approved (OIML R-61).

  • Easy to use 5-key waterproof keyboard. 
  • Red LED display with 6 8-mm digits and 6 LEDs for showing active functions.
  • Standard dimensions for mounting on DIN bar.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
  • Up to 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
  • Up to 100.000 displayable divisions with internal resolution up to 3.000.000 points.
  • Up to 8 signal linearization points with DINITOOLS (3 from keypad).
  • 1 channel A/D 24-bit sigma-delta conversion, up to 3200 conv./sec. autoselect.
  • Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
  • From 12 Vdc to 24 Vdc power supply.
    Fast calibration; theoretical calibration; weighing filter configuration; zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.
    High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Setpoint; Approved transmission of the weight to PC/PLC (with ALMEM Alibi memory option); Counting; Hold e Peak.
    Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory.
    Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
    Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).
  • RS232/C bidirectional port configurable for connection with external units.
  • Double RS485 port for a quick network connection.
  • 16-bit analogue output (DGT1SAN model) 4-20mA / 0-5Vdc / 0-10Vdc at choice. Maximum load applicable on the output current: 350Ohm. Minimum load applicable on the output voltage: 10kOhm.
  • 2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
  • 2 optoisolator photocoupler inputs: 12÷24 Vdc, 5 mA min - 20 mA max, with configurable functions.
  • Alibi memory.
  • RS485 / Profibus converter.
  • RS485 / Ethernet converter 
  • RS485 / Ethernet and WIFI converter.
  • Printer for panel mounting. 
  • Real time clock.
  • Power supplier for mounting on DIN bar.
  • ABS box for wall installation, with protection door.
  • Specific programme for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.

  • Multi-scale repeater (MASTER)
    function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.
  • UNIVERSAL weight repeater
    function which allows to repeat the weight of any scales, through the configuration of the input string.
  • Click to learn more.

Document downloads

insert_drive_file Technichal manual DGT1.pdf
insert_drive_file Manual DGT.pdf
insert_drive_file Manual DGT swe.pdf
insert_drive_file Brochure DGT1SAN.pdf
insert_drive_file Profibus-GSD.rar
insert_drive_file Modbus manual DGT.pdf
insert_drive_file Smart setup DGT1.pdf
insert_drive_file DGT1S 14.12 EN.pdf


Data / printer output Yes
EU-type approved / verified Yes
Modbus Yes
OIML approved Yes
Peak/Hold Yes
RS232 Yes
RS485 Yes
Buy your scale here! You can call, fax or email your order too.
access_time Order before 11.00
and we'll send the same day
phone Call us! +46 176 20 89 20
Opening hours 9-17 weekdays CET