Single point lastcell SPSX 500 kg. Aluminium. OIML C3, ATEX.

Article no SPSX500
Price 385 EUR
Stock status Out of stock
Buy

Available in several variants

SPSX500 500 kg 385 EUR

Brand:

product information

Single point lastcell SPSX 500 kg. Aluminium. OIML C3, ATEX.

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 600x800 mm.

CAPACITIES (kg): 100, 300, 500.
OIML R60. C3 precision class.
17-4 PH stainless steel. IP67 protection.

Main features:

  • C3 PRECISION CLASS
  • OFF CENTER LOAD COMPENSATED
  • MADE IN 17-4 PH STAINLESS STEEL
  • IP67 PROTECTION
  • MAX. CAPACITIES FROM 100 TO 500 kg
  • FOR PLATFORMS WITH DIMENSIONS UP TO 600 X 800 mm
  • SHIELDED CONNECTION CABLE
  • TEST CERTIFICATE AVAILABLE UPON REQUEST


Technical features:

  • Minimum load cell verification interval: Vmin = EMax / 15.000
  • Maximum number of verification intervals: nLC = 3000
  • Full Scale Output: 2mV/V +/- 10%
  • Temperature effect on zero: 0,01% FS/10K
  • Temperature effect on full scale output: 0,001% FS/10K
  • Compensated Temperature Range: -10°C/+40°C
  • Operating Temperature Range: -10°C/+50°C
  • Creep at nominal load in 30 minutes: ± 0,01% F.S.
  • Maximum tolerated excitation voltage: 15 VDC
  • Input Resistance: 390 ± 15 Ohm
  • Output Resistance: 359 ± 5 Ohm
  • Insulation Resistance (100V) >1000 MOhm
  • Safe Overload: 300% F.S.
  • Ultimate Overload: 300% F.S.
  • Nominal displacement: < 0.5 mm
  • 6-wire shielded cable, 3m long, 5mm diameter


ATEX Version:

  • The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
    ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
    ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
  • The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
  • IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.
     

Document downloads

insert_drive_file Datasheet_SPSX_V1.pdf

Specification

EU-type approved / verified Yes
Load cell material Aluminium
Load cell type Single point (off center)
OIML approved Yes
Enter your e-mail address or phone number and we will contact you
Buy your scale here! You can call, fax or email your order too.
access_time Order before 11.00
and we'll send the same day
phone Call us! +46 176 20 89 20
Opening hours 9-17 weekdays CET
shopping_cart