Load cell compression 30ton C4. Stainless steel IP68.

Article no RCD30C4
Price 745 EUR excl. vat
Stock status 3-4 weeks
Buy

Brand:

product information

Load cell compression 30ton C4. Stainless steel IP68.

Digital version of compression load cells, ideal for CE-M approved weighbridges, tanks, silos, etc. Manufactured in STAINLESS STEEL, with IP68 protection, 4000 divisions, fitted with “rodent proof” armoured cable.

  • CAPACITIES (kg): 30000/40000/50000.
  • OIML R60. C4 precision class.
  • Load cells with stainless steel body. Degree of protection IP68.
  • 18m Armoured Rodent Resistant Cable, with standard Stainless Steel Armor.
  • Low Profile Height of only 130mm.


TECHNICAL FEATURES

  • Metrological:
  • Rated capacity (Cn): 30/40t
  • Combined error: ± 0,014 %Cn
  • Temperature effect on zero: 0,0016 %Cn/°C
  • Temperature effect on sensitivity: 0,0012 %Cn/°C
  • Creep error (30 min.): 0,021 %Cn
     
  • Legal Metrology OIML R60:
  • Accuracy class: C4
  • Max. number of intervals (nmax): 4000e OIML
  • Minimum verification interval (vmin): 10000
  • Z= Emax/(2xDR): 4000
     
  • Electrical:
  • Nominal range of excitation voltage: 10 - 16Vdc
  • Rated output: 200000d
  • Current consumption: 35mA
  • Conversion type: Delta-sigma
  • Internal resolution: 24 bit
  • Converter rate: max. 100 conv./sec.
  • RS485 interface communication rate: 4800/19200 bit/sec.
  • Protection against electrostatic discharge according to IEC 61326-1
     
  • General:
  • Service temperature range: -20 ~ +60 °C
  • Compensated temperature range: -10 ~ +40 °C
  • Safe load limit: 150% Emax
  • Ultimate overload: 300% Emax
  • Protection degree IP68
  • Load cells with stainless steel body
  • 6-core armoured cable, PVC sheath, 18m length.
  • Nickel plated steel cable gland.
  • Armoured Anti Rodent Cable with Stainless Steel Armour.
  • Self-centring spherical bases.
  • Equipped with anti-rotation system, to be combined with KRCA cups for proper operation.
     

RCD LOAD CELL: INSTALLATION KIT

  • The KRCA kit allows a correct installation of the RCD load cells below the weighbridge plate.
  • The kit consists of an upper cup with anti-rotation system, a lower cup and a two-hole plate for easier and faster fixing. All components are made from nickel-plated steel.
  • Both cups are designed for optimal operation in conjunction with the cell’s self-centring spherical bases, allowing their proper oscillation and return to position.
  • The cups are also fitted with triple function integrated washers:
    - they keep lubricating grease in its place.
    - they simplify the proper positioning and levelling of the cell and support it during installation/maintenance.
    - they protect the system by preventing dirt and water from accumulating on the bottom of the cup, thus maintaining the correct oscillation and mechanical compensation of the load cells over time.

Document downloads

insert_drive_file Datasheet RCD V1.pdf
insert_drive_file Technical Drawing RCD RCA V1.pdf
insert_drive_file Manual RCD RCA ENG.pdf

Specification

Capacity (kg) 30000,00 kg
Capacity (tonne) 30,00
IP class IP68
Material Stainless
Accessories / Spare parts
Enter your e-mail address or phone number and we will contact you
Buy your scale here! You can call, fax or email your order too.
access_time Order before 11.00
and we'll send the same day
phone Call us! +46 176 20 89 20
Opening hours 9-17 weekdays CET
shopping_cart