product information

Dual track vehicle weighing 13,5 meter / 30tonne.

Innovative vehicle weighing dual track weighbridge, easily transportable and installable thanks to the reduced height and weight. Designed and built with vey high quality materials, this represents the most efficient solution for saving time, space, and money in comparison to the classic weighbridges currently available on the market. The standard version is fitted with CE-M 3000e APPROVAL, for legal for trade use.

  • Precise and versatile platforms, suitable for all kinds of applications; ideal for modern industries, farms, work yards, landfills, ports, etc, in which one can save space or change the logistical stations.
  • Extremely compact: only 22 cm high. Takes up little space if installed on the street surface, reduced masonry if installed flush floor to the road surface.
  • The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe (version for higher loads is available upon request).
  • Sturdy loading surface in striated sheet steel.
  • Sandblasting and varnishing with bi-component epoxy coating, highly resistant to corrosion.
  • Installable above, as well as flush floor to the street surface.
  • Reinforced on and off ramps, for mobile or fixed installation (optional).
  • Weight detection system through oscillating load bars (patented system) with integrated brake / acceleration compensating limits and anti-slip rubber resting plates.
  • Load cells protected from dust and water.
  • Fitted with approval, carried out in factory (to be combined with Dini Argeo indicator).
  • Dust and waterproof wirings and connections, easy to connect and disconnect.
  • Modularity: by adding or removing pairs of modules, the weighbridges can have these lengths: 4,5 m - 9 m - 13,5 m - 18 m - 22,5 (up to 36m by price estimate).
  • Wide range of connectable weight indicators, also functioning with rechargeable battery, which allow to use the weighbridge also without an electrical power supply.
  • 30m long connection cable between DTW and indicators.


  • Available upon request with special capacities and divisions.
  • Transport (upon price estimate).
  • Kit of on/off mobile ramps.
  • Angles of crest kit for flush floor installation or for concrete on/off ramps.
  • Dual range CE-M 3000 + 3000e approved (upon price estimate).

Spray paint can RAL 3009 of 400ml included as standard, for post-installation finishing.

Document downloads

insert_drive_file User Manual 3590E.pdf
insert_drive_file Technical Manual 3590E.pdf
insert_drive_file Manual_DTW_V2 ENG.pdf
insert_drive_file Manual DTW V1 ENG.pdf
insert_drive_file Dimensions_DTW_V1.pdf
insert_drive_file DTW901V03-BROCHURE.pdf
insert_drive_file DTWBK0615V1-BROCHURE.pdf


Type of vehicle scale Static
Accessories / Spare parts

3 960 EUR
4-5 weeks

530 EUR
Out of stock

880 EUR
4-5 weeks

990 EUR
In stock

350 EUR
4-5 weeks

400 EUR
4-5 weeks

250 EUR
4-5 weeks

682 EUR
In stock

430 EUR
In stock
Enter your e-mail address or phone number and we will contact you
Buy your scale here! You can call, fax or email your order too.
access_time Order before 11.00
and we'll send the same day
phone Call us! +46 176 20 89 20
Opening hours 9-17 weekdays CET