Crank test stand for 90° peel tests with simple operation

Article no TPE
Price 340 EUR excl. vat
Stock status 5-10 days


product information

Crank test stand for 90° peel tests with simple operation

  • The SAUTER test stand TPE has been developed specifically for peel testing. Typically this involves pulling a bonded material layer from a base material (see diagram)
  • Safe reliable operation due to the crank
  • As a general rule the significant value in this process is the force required to pull away the top layer from bonded material
  • The SAUTER TPE has been designed such that the force measuring unit exerting the force simultaneously moves sidewards and upwards. This means that a peel-off movement is produced, avoiding shear forces which could distort the result.
  • The test unit moves at an angle of 45° to the horizontal. The force-measurement device is fitted in an exact vertical position
  • Suitable for all SAUTER force-measuring devices up to 500 N (not included)

Technical data:

  • Travel distance per knob rotation (one stroke): 3,1 mm
  • Maximum stripping length: 105 mm
  • Overall dimensions W×D×H 420x215x480 mm
  • Net weight approx. 22 kg

Document downloads

insert_drive_file Datasheet_TPE_V1.pdf
insert_drive_file Manual TPE ENG.pdf
Enter your e-mail address or phone number and we will contact you
Buy your scale here! You can call, fax or email your order too.
access_time Order before 11.00
and we'll send the same day
phone Call us! +46 176 20 89 20
Opening hours 9-17 weekdays CET