Crane scale 6000kg/2kg. With remote display. Portable. "Triple range". With beauty marks.

Article no MCWN11T6RF-S
Price 1 232 EUR
1 590 EUR
Rec. price 1 590 EUR
Stock status In stock


product information

Crane scale 6000kg/2kg. With remote display. Portable. "Triple range". With beauty marks.

With less beauty marks, hand held remote display included.

Easy to use and reliable professional digital crane scales, for weighing in industrial environments, fitted with protective transport case. Thanks to their compact size, the MCWN crane scales just slightly reduce the lifting distance of the crane. Available also CE-M APPROVED. The MCWN crane scales are standard fitted with a radio frequency communication module, for connection to PC, remote printer, or weight repeater.

Fitted with test certificate obtained with sample weights.

  • 25 mm LCD backlit display, easily visible in any lighting condition;
  • Fitted with upper and lower shackles;
  • Compact size and minimum distance between upper and lower shackle;
  • Precision: +/- 0.03% on F.S.;
  • 5-key waterproof keypad: Zero, semi automatic or preset Tare, Mode, Print, On/Off;
  • Sturdy case in oven-fire painted steel;
  • Fitted with 868MHz multipoint radio frequency module (RF versions), for connection to remote printer, PC of one or more crane scales (also with approved transmission through the Alibi Memory option), or weight indicator/repeater of one or more crane scales (with attached printer, labeller, or other accessories). Maximum communication distance in adequate conditions is 70m indoors and 150m outdoors;
  • Fitted with infrared remote control for use up to 8m of distance. The remote control can be configured by the customer as a single automatic tare or as a remote keypad;
  • Power supply through 4 AA batteries, which may be rechargeable, operating time of about 40 hours (without radio frequency communication);
  • Digital calibration and programmable Set-Up directly from the keypad or from the PC with Dinitools;
  • Programmable digital filter and auto switch-off;
  • Operating termperature: -10 /+40 ºC;
  • RS232 serial port on the RJ45 connector for quick programming with Dinitools;
  • Fitted with protective transport case with dimensions 410x260x240mm (w x l x h).
  • Radio frequency Weight transmission, also approved with the Alibi Memory option
  • Weighs accumulation.
  • +/- check.
  • Weigh percentile.
  • Counting.
  • Input/Output.
  • Hold, for freezing the weight on the display.
  • Peak, for identifying the weight peaks.
  • X 10 high resolution visualisation.
  • Net/Gross or lb/kg conversion.
  • Remote radio frequency weight indicator/repeater, with attached printer, labeller, or other accessories (see DFW.., 3590.., TRS.., DGT60.. series’ weight indicators).
  • Real Time Clock.
  • Alibi memory.
  • SIT calibration certificate according to OIML/ASTM standards.

Document downloads

insert_drive_file Manual MCWN V2 ENG.pdf
insert_drive_file Datasheet_MCWN-RF_V1.pdf
insert_drive_file Brochure_MCW_V1 ENG.pdf
insert_drive_file Technical_Drawing_MCWN_V2.pdf


Capacity 6000,00 kg
Resolution 0,5kg
Enter your e-mail address or phone number and we will contact you
Buy your scale here! You can call, fax or email your order too.
access_time Order before 11.00
and we'll send the same day
phone Call us! +46 176 20 89 20
Opening hours 9-17 weekdays CET