Weighing indicator for panel mounting. 2 alarm. 4-20 mA.

Multipurpose weight indicator/transmitter for panel mounting, 4 dependent or independent channels for direct reading and diagnostics of each connected load cell. The wide range of available interfaces, makes it easy to integrate the weighing with any automation system. CE-M approvable (OIML R-76 / EN 45501).

Standard version with 2 inputs, 2 outputs, 1 RS232 bidirectional port and 1 RS485 bidirectional port and 4-20Ma / 0-5 Vdc / 0-10 Vdc analogue output

••Easy to use 5-key waterproof keyboard.
••Highly efficient red LED display with 6 13-mm digits and 6 LEDs for showing active functions.
••Case for panel mounting in Abs according to DIN standard, 96x96x80 mm (lxhxpx). Perforation 90x88 mm (lxh) for panel mounting.
••Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS
••Up to 10.000e or multirange 2 x 3000e @ 0,3 µV/d for CE-M approved legal for trade use.
••Up to displayable 800.000d with internal resolution up to 3.000.000 points.
••Up to 8 signal linearization points with DINITOOLS (3 from keypad).
••A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
••Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
••Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
••Master/Slave management (up to 4 Slaves / 1 Master).
••From 12 Vdc to 24 Vdc power supply.