Stainless steel double shear beam load cells suitable for building, for example, to make CE-M approved scales for high capacities or for weighing tanks and hoppers with the relevant accessories. High accuracy also with the expansion of the weighing structures. TECHNICAL FEATURES C4 PRECISION CLASS 17-4 PH STAINLESS STEEL CONSTRUCTION IP68 PROTECTION MAX. CAPACITIES FROM 10000 TO 30000 kg SHIELDED CONNECTION CABLE TEST CERTIFICATE AVAILABLE UPON REQUEST MAIN FEATURES Minimum load cell verification interval: Vmin = EMax / 10.000 Combined error 0,03% of Full Scale Output (F.S.) Full Scale Output: 2mV/V +/- 0,1% Temperature effect on zero: 0,00116% /°C Temperature effect on full scale output: 0,00097% /°C Compensated Temperature Range: -10°C/+40°C Operating Temperature Range: -30°C/+85°C Creep error after 240 minutes: <0,02% F.S. Maximum tolerated excitation voltage: 15 VDC Input Resistance: 700 ± 7 Ohm Output Resistance: 700 ± 7 Ohm Zero Balance: +/- 1% F.S. Insulation Resistance: >5000 MOhm Safe Overload: 150% F.S. Ultimate Overload: >300% F.S. 6-wire shielded cable, 15m long EXTRAS AVAILABLE Assembly kit II 1GD ATEX Certificate for each load cell Declaration of ATEX conformity of the system (for the code see the pages of the atex weight indicators and MB4 atex barrier kit)
VETEK WEIGHING AB Box 79 Industrivägen 3 S-760 40 Väddö Sweden tel: +46 176-20 89 20 fax: +46 176-20 89 29 e-mail: info@vetek.com map: how to find us
Support/Manuals Service Partners Terms of sales Webshopen About scales